WMsensors.pl WMsensors.pl is a small perl-program which monitors the temperature and voltages of CPU and motherboard.
Download

WMsensors.pl Ranking & Summary

WMsensors.pl Tags

temperature temperature monitoring CPU monitoring voltage monitoring WMsensors.pl voltages

WMsensors.pl Description

WMsensors.pl is a small perl-program which monitors the temperature and voltages of CPU and motherboard. WMsensors.pl is a small perl-program which monitors the temperature and voltages of CPU and motherboard and also shows the Fan-speed.Runs as a dock app for Window Maker.Needs no config-file, but a proper configured installation of lm_sensors and uses the Wharf::JDockApp modul from the CPAN.Requirements:You need a proper configured installation of lmsensors.The output of the command "sensors" should contain lines like this one.· CPU core: +1.87 V (min = +1.98 V, max = +2.49 V) ALARM· +2.5V: +0.36 V (min = +2.24 V, max = +2.74 V) ALARM· I/O: +3.40 V (min = +2.95 V, max = +3.62 V) · +5V: +4.89 V (min = +4.47 V, max = +5.49 V) · +12V: +12.04 V (min = +10.79 V, max = +13.18 V) · CPU Fan: 0 RPM (min = 3000 RPM, div = 2) · P/S Fan: 0 RPM (min = 3000 RPM, div = 2) · SYS Temp: +34.4C (limit = +45C, hysteresis = +40C) · CPU Temp: +40.3C (limit = +60C, hysteresis = +55C) · SBr Temp: +24.8C (limit = +65C, hysteresis = +60C) INSTALLATIONFirst step: Be sure you have installed the Perlmodule "Wharf::JDockApp" from the CPAN. If you didn't have this Perlmodule type on the shell: $ perl -MCPAN -e 'install Wharf::JDockApp' (This will install the needed Perl-module)Second step: $ cp wmsensors.pl /usr/local/bin Third step: Run wmsensors.pl $ wmsensors.pl or $ wmsensors.pl --help

WMsensors.pl Related Software