T-SLEDGE A multi-band compressor for mastering, equipped with peak limiter
Download

T-SLEDGE Ranking & Summary

T-SLEDGE Tags

VST plugin VST plugin mastering limiter plug-in peak-limiter digital peak peak average peak 3-band compressor peak behavior multi-band filter multi-band band compressor band limiter Peak Monitor peak compressor peak pressor three-band compressor Pikes Peak peak display Multi Band Compressor peak control IIR FIR limiter compressor variable peak measure peak-to-peak rattle locate peak find peak Peak Averaging multi band saw

T-SLEDGE Description

The T-SLEDGE VST plugin was developed to be a multi-band compressor for mastering, equipped with peak limiter, level maximizer and 4 compressors / expanders / limiters. And it is equipped with 2 kinds of dividing filter IIR/FIR. So, it also operates as a dynamics EQ. Main features: Threshold: Controls the threshold of compressing/limiting. The signal at a level that is larger than this value is compressed Ratio: Controls the ratio of compressing/limiting. It operates as an expander when this value is smaller than 1.0. When this value is maximized, it operates as a limiter Attack: Controls the attack time of compressing/limiting Release: Controls the release time of compressing/limiting. It makes the sound smooth, if you choose the large value Soft: Sets the soft/hard mode of compressing/limiting process. While the soft mode compression gradually compresses the threshold When the hard mode compression reaches the threshold by the signal, it immediately compresses. There a little differences using it, but it makes compressing/limiting process smooth or vivid. At the present stage, this function becomes effective only to the compression processing ARC: Sets the automatic release time control system. (Sets all compressor and limiter release time ARC) Automatically ARC calculates the release time. If you want to create loudness sound, I recommend to turn it off IIR-FIR: Sets the dividing filter type. If you want to use for mastering, I recommend to use FIR. FIR filter cause a little latency, but it’s no more than 1ms Gain: Controls the level of each output signal Input Gain: Controls the level of input signal Knob: Ctrl+Left-Click -> Fine adjustment of the value. Shift+Left-Click -> Link adjustment of the value. Ctrl+Shift+Left-Click -> Fine link adjustment of the value VU Meter: Range 0dB < -> -40dB

T-SLEDGE Related Software